Loading... Please wait...

Our Newsletter


AudioArts R-90 SL-90 Module Refurbished

  • Back
  • Front
$20.00 (Fixed shipping cost)
Current Stock:

Product Description

AudioArts R-90 SL-90 Module Refurbished

SL-90 modules are for stereo line input signals.

Each module accepts two stereo sources: A and B, switched at the top of the module.  Recessed front panel multi-turn trimpots adjust the left and right levels.  Output switches assign the selected source signal to any combination of the consoles's four outputs: two stereo outputs - PGM and AUD; and two mono outputs - MONO and MXM.  Note that the assignment to the MXM output is post-fader, pre-on, while the other assignments are post-fader, post-on.

A CUE switch places the module's signal on the console's cue bus, where it may be heard on the meterbridge mount cue speaker and/or as an interrupt to the console operator's headphones and/or control room monitor speakers.  The various cue interrupt modes are programmed at the console's CRS-90 module via PCB-mounted dipswitch.

Level is set by a long-throw fader.

Channel ON (START) and OFF (STOP) switches are at the bottom of the module.  In addition to being controlled remotely, these can also be programmed to preform a variety of functions, including starting and stopping external source machines, activating cotrol room and studio mutes, external tallies, and timer restart.  The STOP switche's LED can be controlled by an external source machine to act as a "ready" indicator.

All audio and control input and output signals are made via the multipin DB-25 connector mounted on the top of the module and located underneath the hinged meterbridge.

Warranty Information

Reconditioned products from Lightner Electronics come with a 90 Day Service Warranty unless otherwise stated.
NOTE: Clients must properly pack and return the product for repair freight prepaid with a "Return Authorization Number
(R.A.) from Lightner Administration. Call 1-814-239-8323 prior to return shipping for more details.